Capped IP Transit

Capped IP Transit

Committed Data Rate (CDR) with a cap is very similar to your office DSL connection, except it is the same speed in both directions. Basically, you tell us how large you would like your connection to be, for example 2Mbps, and we will cap the connection to this speed.  It means you can use the connection as much as you’d like without incurring extra charges; however the maximum you would be able to throughput would always be fixed to the limit you specify.

We can increase the limit at short notice if demand for your service rises.

Capped connections are provisioned at 1Mbps intervals and are at a contention rate of 1:1, i.e. the entire commitment is guaranteed to be available for 100% of the month.

Line Speed	Price per Mbit	(Bearer Port Speed)
1Mbps – 9Mbps	£35.00	100Mbps
10Mbps – 19Mbps	£30.00	100Mbps
20Mbps – 29Mbps	£25.00	100Mbps
30Mbps – 49Mbps	£20.00	100Mbps
50Mbps+	price upon request	100Mbps/1000Mbps

Setup charges

We have no setup charge for bandwidth, however we do charge for cabling in our own facilities, at £55.00 per cable.

If you are connecting to us in a non-Melbourne facility, then you will be responsible for the ‘tail-circuit’ to our cabinet, which may incur a charge from the datacentre operator.

Delivery

We can deliver this service in the following facilities:

• Melbourne – Reynolds House, Manchester Technopark
• Melbourne – Turing House, Manchester Technopark
• Melbourne – Greenheys Building, Manchester Science Park
• Telecity – Reynolds House, Manchester Technopark
• Telecity – Williams House, Manchester Science Park
• Telecity – Kilburn House, Manchester Science Park

IP Addresses

IP Addresses are allocated in netblocks of suitable sizes according to the customer’s requirements, and in line with RIPE guidelines.

There is no charge for IP addresses allocated from our range.

PI Space and/or BGP

Customers wishing to have PI space obtained through our RIPE membership will be charged a £250 admin charge to cover our time in helping with the requests, and configuring our routers.

Customers wishing to connect to Melbourne by BGP, either through their own AS or from PI space, will incur a £250 admin charge to cover our time in setting up the router configuration.