Burstable IP Transit

Burstable IP Transit (95th Percentile)

Instead of the connection being fixed, burst is allowed. So you may ask for a 1Mbps commitment on a 100Mbps port for example. We then use industry standard 95th Percentile billing calculations to work out any overage charges as follows:

Bandwidth usage from your switch port is sampled at regular intervals, and logged on our system. The top 5% of bandwidth usage for the month is disregarded (roughly 36 hours), the 95th percentile remaining is used as the figure on which you are billed. So if this figure is higher than your commitment, you will be billed for the excess at our price-list rate.

Burstable connections are provisioned at a minimum of 1Mbps and are at a contention rate of 1:1, i.e. your entire commitment is guaranteed to be available for 100% of the month. Burst is not guaranteed and is charged at 10% over your CDR rate.

Line Speed	Price per Mbit	Port Speed
1Mbps – 9Mbps	£35.00	100Mbps
10Mbps – 19Mbps	£30.00	100Mbps
20Mbps – 29Mbps	£25.00	100Mbps
30Mbps – 49Mbps	£20.00	100Mbps
50Mbps+	price upon request	100Mbps/1000Mbps

A more in-depth discussion of 95th percentile, and the other bandwidth billing methods is available here (external link).

Setup charges

We have no setup charge for bandwidth, however we do charge for cabling in our own facilities, at £55.00 per cable.

If you are connecting to us in a non-Melbourne facility, then you will be responsible for the ‘tail-circuit’ to our cabinet, which may incur a charge from the datacentre operator.

Delivery

We can deliver this service in the following facilities:

• Melbourne – Reynolds House, Manchester Technopark
• Melbourne – Turing House, Manchester Technopark
• Melbourne – Greenheys Building, Manchester Science Park
• Telecity – Reynolds House, Manchester Technopark
• Telecity – Williams House, Manchester Science Park
• Telecity – Kilburn House, Manchester Science Park

IP Addresses

IP Addresses are allocated in netblocks of suitable sizes according to the customer’s requirements, and in line with RIPE guidelines.

There is no charge for IP addresses allocated from our range.

PI Space and/or BGP

Customers wishing to have PI space obtained through our RIPE membership will be charged a £250 admin charge to cover our time in helping with the requests, and configuring our routers.

Customers wishing to connect to Melbourne by BGP, either through their own AS or from PI space, will incur a £250 admin charge to cover our time in setting up the router configuration.